新闻资讯

新闻资讯

current position: Home > News Center > Industry News

Application Analysis of Thermal Insulation Rock Wool Boards in Cold Storage Insulation

2025-07-08 10:06:31
times

1. Basic Characteristics of Thermal Insulation Rock Wool Board

Rock wool board is a plate-shaped thermal insulation material produced from natural rocks such as basalt and diabase. The raw materials are melted at high temperature and fabricated into fibers via the centrifugal method, then mixed with a proper amount of binder and dust-proof oil, and finally processed through curing, cutting and other procedures. It features the core properties as follows:

1. Superior thermal insulation performance: Uniform and slender rock wool fibers form a large number of internal micro-pores that effectively block heat conduction, with a stable thermal conductivity of 0.036-0.042W/(m·K).

2. Excellent fire resistance: As a Class A non-combustible material, rock wool has a melting point above 1000℃, without combustion or toxic gas emission during fire accidents.

3. Stable chemical performance: It features acid and alkali corrosion resistance and aging resistance, supporting a long service life.

4. Hydrophobic performance: Specially treated rock wool boards possess reliable hydrophobicity and effectively prevent moisture penetration.

5. Eco-friendly characteristics: Free of harmful substances and recyclable, fully complying with environmental protection standards.

2. Special Insulation Requirements for Cold Storage

As special buildings for storing temperature-sensitive goods such as food and pharmaceuticals, cold storages impose strict technical requirements on thermal insulation systems:

1. Temperature stability: A long-term stable low-temperature environment is required. The temperature of ordinary refrigerated warehouses ranges from -18℃ to 4℃, while quick-frozen warehouses maintain temperatures below -30℃.

2. Moisture-proof and anti-condensation performance: Condensed water is easily generated in low-temperature environments. Insulation materials must deliver excellent moisture resistance to avoid condensation accumulation.

3. Structural strength: The insulation system shall bear the load of internal equipment and resist occasional mechanical impact.

4. Fire safety: Cold storages store high-value goods, leading to stringent fire protection requirements.

5. Sanitation standards: Materials applied in areas directly contacting food must meet food safety specifications.

6. Durability: The insulation performance shall remain stable for long-term service without significant attenuation.

3. Feasibility Analysis of Rock Wool Board Application in Cold Storage

3.1 Application Advantages

1. Eligible thermal insulation performance: The thermal conductivity of rock wool boards meets the insulation demands of most conventional cold storages, especially suitable for refrigerated warehouses with non-extreme operating temperatures (0℃ to -18℃).

2. Outstanding fire safety: As a Class A fire-resistant material, rock wool significantly improves the overall fire resistance grade of cold storage buildings and effectively reduces fire risks.

3. Good structural adaptability: Rock wool boards with customizable thickness and density can adapt to insulation requirements of different parts of cold storages, including walls and roofs.

4. Environmental and hygienic performance: The inorganic fiber material avoids bacterial growth and fully meets sanitation requirements for food storage environments.

5. Economic benefits: Compared with high-end special insulation materials, rock wool boards have prominent cost advantages with balanced performance.

3.2 Application Limitations

1. Limited ultra-low temperature adaptability: The thermal insulation efficiency of rock wool will decrease in ultra-low temperature environments (below -30℃), requiring increased insulation thickness or composite application with other high-performance materials.

2. High requirements for moisture-proof treatment: Although rock wool itself is hydrophobic, it must be matched with a complete moisture-proof layer in the high-humidity internal environment of cold storages to prevent performance degradation caused by moisture penetration.

3. Limited compressive strength: Low-density rock wool boards have insufficient bearing capacity and are not applicable for load-bearing parts such as cold storage floors.

4. Strict construction requirements: Professional installation is mandatory to ensure tight board joints and eliminate cold bridge formation.

4. Key Technical Points for Application

Standardized technical treatment is required for rock wool insulation applied in cold storage projects:

4.1 Moisture-proof Treatment

- A continuous moisture-proof and vapor-barrier layer must be installed on the warm side (outer side) of rock wool boards.

- All board joints shall be tightly sealed with special professional adhesive tapes.

- Specialized moisture-proof reinforcement shall be implemented for components penetrating the insulation layer.

4.2 Thickness Design

- Determine the insulation thickness strictly according to cold storage design temperature and thermal calculation.

- A thickness of 100-150mm is generally recommended for conventional -18℃ refrigerated warehouses.

- Reserve a reasonable safety margin to offset long-term performance attenuation.

4.3 Installation Technology

- Adopt staggered joint laying to reduce cold bridge generation.

- Apply anti-cold-bridge treatment to all fixing fasteners.

- Fill board joints with professional sealing materials to ensure overall tightness.

4.4 Auxiliary Optimization Measures

- Combine with reflective films to enhance overall thermal insulation efficiency.

- Adopt composite insulation structures with other high-performance materials for key parts.

5. Performance Comparison with Other Common Cold Storage Insulation Materials

1. Polyurethane (PU) Foam

- Advantages: Lower thermal conductivity (0.022-0.028W/(m·K)) and superior insulation performance; capable of on-site foaming to fill tiny gaps.

- Disadvantages: Poor fire resistance (Grade B1/B2) and relatively high material cost.

2. Extruded Polystyrene Board (XPS)

- Advantages: High compressive strength and excellent integral moisture resistance.

- Disadvantages: Low fire resistance grade, and toxic gas may be released under high-temperature combustion.

3. Vacuum Insulation Panel (VIP)

- Advantages: Ultra-low thermal conductivity (approximately 0.008W/(m·K)) and outstanding insulation effect.

- Disadvantages: Extremely high cost, vulnerable to puncture damage and difficult maintenance.

In comparison, rock wool boards show prominent advantages in fire safety and cost performance, while their thermal insulation efficiency is slightly lower than polyurethane and other high-performance materials under ultra-low temperature conditions.

6. Practical Application Recommendations

6.1 Applicable Scenarios

- Small and medium-sized conventional refrigerated cold storages (0℃ to -18℃).

- Cold storage projects with high fire protection requirements.

- Engineering projects with limited budget and balanced performance demands.

6.3 Non-recommended Scenarios

- Ultra-low temperature quick-frozen warehouses (below -30℃).

- High-humidity environments where complete moisture-proof measures cannot be guaranteed.

- Load-bearing structural parts such as cold storage floors.

6.3 System Design Suggestions

- Adopt a composite structure of "moisture-proof layer + rock wool insulation layer + inner protective layer".

- Apply composite matching with other insulation materials for key thermal insulation parts.

- Reserve sufficient insulation performance margin to ensure long-term stable operation.

7. Conclusion

In summary, thermal insulation rock wool boards are applicable to most conventional cold storage insulation projects, especially for scenarios with high requirements for fire safety and economic efficiency. Its excellent fire resistance and stable thermal insulation performance fully meet the operational demands of ordinary refrigerated cold storages. With complete moisture-proof measures and standardized construction technology, rock wool can form a safe, stable and long-service cold storage insulation system.

Nevertheless, for cold storages with ultra-low temperature operating conditions or special technical requirements, high-performance insulation materials or composite insulation schemes are recommended to optimize the overall thermal insulation effect. In practical engineering applications, the optimal insulation solution shall be determined through comprehensive evaluation based on project demands, budget conditions and local climatic environments.


Tags

Related news

  • menu
Copyright © 2022 Jiangsu Zhongzhe New Materials Co., Ltd All rights reserved record number:苏ICP备2021027767号 Mainly engaged in, Welcome to inquire! Technical Support: yunqi disclaimer